how to add 3rd party library to kontakt 5

I have one machine where my samples are on C: (the only SSD) and the other where the large SSD drive is D. The solution proposed by - to set up drive letters and paths identically (I am guessing using an ASSIGN command) - does not work for me. My symptoms in C3 with Kontakt 6 are exactly the way described in his initial post on this thread. I am picking up here on this old thread, because this is exactly the problem I am having and do not have a good solution. Thanks for helping out and have a nice week, Volker It is really the drive letter & path that has to fit completely. The method Dave described works (if one follows carefully his instructions ).

However: I will try to further investigate this and report back.Įdit: after some attempts I got it managed. So it is probably impossible to leave samples in an adequate relative branch on my ssds. But this could probably have a completely different reason: when I set up my laptop some years ago I decided (for a reason I don’t remember today) to place the c3 exe files to drive f: instead of c. I also tried to create a new drive with the same drive letter as the one the samples reside on my laptop also with no success so far. But this is no way to go as it needs two non-identical racks (atm my racks reside inside drop-box with physical copies on both machines). What I remember: when I first used these libraries by simply copying the racks from laptop to PC by hand I could fix the problem by re-storing the rack. I tried what you described but unfortunately had no success so far as kontakt still doesn’t find the samples and pretends on the paths taken from my laptop.īut I confess: I only trid this on the machine making troubles. First off: thanks for also chiming in here, Terry.

How to add 3rd party library to kontakt 5